Skip to content
Sanayi Filmleri logoSanayi Filmleri

Filming factories in hot weather: light, timing and planning in a Southeastern summer

Summers in Southeastern Turkey are long, hot and bright. In Şanlıurfa, Diyarbakır and Mardin, temperatures often climb above 40 degrees in July and August. For a factory film, this climate is both a challenge and, when used well, an advantage.

In this article we explain how we plan the light, the hours, the equipment and the crew when filming in hot weather. The goal is to show what to consider when deciding in which season to film.

The short answer

In summer, outdoor and aerial shots should be planned for early morning and close to sunset, and indoor filming for the middle of the day. If possible, spring and autumn are more comfortable for outdoor filming. But if your production schedule calls for the summer months, a strong film is entirely possible with the right planning.

Why is the midday sun a problem?

When the sun is overhead, its harsh light creates dark, sharp shadows on buildings and people. White and light-coloured factory facades glare in this light and lose their detail. Eye sockets on people’s faces fall into darkness.

That is why outdoor shots taken at midday usually look flat and harsh. The same facility filmed at 7 in the morning or 6 in the evening gains depth, its colours warm up and the buildings look three-dimensional.

Splitting the filming day by the hour

In summer we usually plan a filming day like this:

Time What we film Why
Sunrise to 9:00 Facade, drone, facility entrance Soft, side light and lower temperatures
9:00 to 16:00 Production line, laboratory, offices, interviews Outdoor light does not matter indoors
16:00 to sunset Second round outdoors, loading area, drone Warm light and long shadows

This order improves the image quality and keeps both the crew and your workers out of the sun during the hottest hours.

Heat and light indoors

Most production areas are hot inside in summer too, especially in plants with heat processes such as furnaces, extrusion or casting. This affects filming in two ways:

Equipment: cameras and lights can overheat when they run for a long time at high temperatures. The equipment needs to wait in the shade in a ventilated area, and spare batteries need to be kept cool.

Image: hot air can create a shimmer effect with long lenses. It is visible at furnace mouths, on hot metal surfaces and above asphalt. Used well, it gives an industrial film a dramatic atmosphere; when it is not wanted, it can be avoided by changing the angle and distance.

Sunlight coming through the skylights in factory roofs can create beautiful beams of light indoors. To capture these moments, it helps to find out before filming which area gets light at which time of day.

Drone filming in summer

Aerial filming is possible in summer as well, but a few points need attention:

  • Battery life: at high temperatures drone batteries drain faster and can overheat. Flights are kept short, with cooling time between batteries.
  • Turbulence: at midday, hot air rising from the ground can make the drone image shake. The air is calmer early in the morning.
  • Dust and haze: on dry summer days, dust in the air fades distant shots. Calm, clear mornings give the sharpest images.

Which season is best?

In the Southeast, the most comfortable periods for a factory film are usually April and May, and October and November. The light is soft, the temperature does not get in the way, and it is possible to work outdoors all day.

But more important than the season is what the film will tell:

  • For agriculture and food production plants, the harvest and the months when seasonal products are processed are the most meaningful time to film. If that falls in the hot months, the shoot is planned accordingly.
  • In textile, machinery and metal plants, production is similar all year round, so the choice of season is more flexible.
  • The trade fair calendar can also decide. If the film has to be ready for a particular fair, work backwards from the time needed for editing and language versions and choose the filming date accordingly.

Conclusion

The Southeastern summer is not an obstacle to a factory film; it is a condition to plan for. Outdoor shots taken at the right hours bring the warm light of the region into the film, and indoor filming makes good use of the hottest hours of the day.

At Sanayi Filmleri, we plan the filming schedule together with you, around your production routine and the climate of the region. Tell us where your factory is and when you want to use the film, and we will suggest the right period for filming.

Let's talk about your factory film

A short message is enough. We will listen to your project and prepare a clear, itemised quote.